EDJ1108BASE
Specifications
- Density: 1G bits
- Organization
-16M words x 8 bits x 8 banks
- Package: 78-ball FBGA
-Lead-free (RoHS compliant)
- Power supply: VDD, VDDQ = 1.5V +/- 0.075V
- Data rate: 1333Mbps/1066Mbps/800Mbps (max.)
- 1KB page size
-Row address: A0 to A13
-Column address: A0 to A9
- Eight internal banks for concurrent operation
- Interface: SSTL_15
- Burst lengths (BL): 8 and 4 with Burst Chop (BC)
- Burst type (BT):
-Sequential (8, 4 with BC)
-Interleave (8, 4 with BC)
- /CAS Latency (CL): 5, 6, 7, 8, 9, 10, 11
- /CAS Write Latency (CWL): 5, 6, 7, 8
- Precharge: auto precharge option for each burst access
- Driver strength: RZQ/7, RZQ/6 (RZQ = 240ohm)
- Refresh: auto-refresh, self-refresh
- Refresh cycles
-Average refresh period
7.8 µs at 0'C <= TC <= +85'C
3.9 µs at +85'C < TC <= +95'C
- Operating case temperature range
-TC = 0'C to +95'C
Features
- Double-data-rate architecture; two data transfers per clock cycle
- The high-speed data transfer is realized by the 8 bits prefetch pipelined architecture
- Bi-directional differential data strobe (DQS and /DQS) is transmitted/received with data for capturing data at the receiver
- DQS is edge-aligned with data for READs; centeraligned with data for WRITEs
- Differential clock inputs (CK and /CK)
- DLL aligns DQ and DQS transitions with CK transitions
- Commands entered on each positive CK edge; data and data mask referenced to both edges of DQS
- Data mask (DM) for write data
- Posted /CAS by programmable additive latency for better command and data bus efficiency
- On-Die Termination (ODT) for better signal quality
- Synchronous ODT
- Dynamic ODT
- Asynchronous ODT
- Multi Purpose Register (MPR) for temperature read out
- ZQ calibration for DQ drive and ODT
- Programmable Partial Array Self-Refresh (PASR)
- /RESET pin for Power-up sequence and reset function
- SRT range:
- Normal/extended
- Auto/manual self-refresh
- Programmable Output driver impedance control
User's Manual, Technical Note
Page Top
